Clake-fololo Automation Inc Products

DPS11 Inductive position switch

Characteristics:

Non-contact measurement, metal position sensor, easy for installation, with power supply and action instructions.

Small and exquisite, economical and practical.

Profile:

DPS11 inductive position switch is easy installation, compact, it is an economic and practical non-contact position switch. This type of position switch increases its mechanical strength. In specific applications it does not exist abrasion and impact because of non-contact measurement which is greatly enhanced the practical life. It also specially adds a tail light which has noctilucent display, so it increases the visibility.

Our company specially select a standard selection for customers, at the same time, we add to extended special requirements for you to choose, if it still couldn’t meet your requirements, please list us your photos and tables.

The main parameters:

Product Standard Table:

Num	Configuration type	Configuration name
1	Shielding options	Unshielded
2	Connection size	M12
3	Pressure of medium	Normal atmosphere

Particular Requirements for Product List:

Code	Configuration type	Configuration name
T11	Shielding options	Shielding
T21	Connection size	M18
T22	Connection size	M30
T31	Pressure of medium	High pressure
T00	Special requires	Pls list photos

Method of shielding	Shielded, unshielded
Connector size	M12, M18, M30
Power	Two-wire＜0.8mA, three-wire＜13mA
Detection distance	See the table below
Power supply voltage	12~24VDC, pulsation (p-p) under 10%
Detection of objects	Metal
Control output (switching capacity)	Two-wire: 3~100mA, three-wire: max 200mA
Protection circuit	Pulse absorption, load protection circuit
Withstanding voltage	1000VAC, 50/60Hz
Connectivity	Pre-wired
Vibration (durable)	10~55Hz, upper and lower amplitude 1.5mm
Impact (durable)	1000m/s
Environment (when action)	-25~75℃, ≤35～95%RH, avoid corrosive gas

1.4.Detection distance

Power supply type		Shielded			Unshielded
	Connector size	M12	M18	M30	M12	M18	M30
Two-wire DC	Detection distance (mm)	3	7	10	8	14	20
Two-wire DC	Set distance (mm)	0~2.4	0~5.6	0~8	0~6.4	0~11.2	0~16
Three-wire DC	Detection distance (mm)	2	5	10	5	10	18
Three-wire DC	Set distance (mm)	0~1.6	0~4	0~8	0~4	0~8	0~14

Introduction of parts:

Terminal box: used for the connection of sensor which coil out directly and other equipment.